This page is an introduction and tutorial that will get you familiar with Terminator’s features. Additional functional areas are explored in other pages, but at the end of this page you’ll be getting a good idea of the power of Terminator.
When you first start Terminator you will get a default, minimal window, looking something like the following:
There may be some cosmetic differences, but it should look fairly similar. It may in fact look a little too minimal to some of you, but this is a deliberate policy. Keep the focus on the terminal, not on a cluttered interface. This is why we don’t waste space on a traditional menu bar and toolbar. Even the terminal scrollbar and titlebar (the red strip) can be turned off, although you do lose ease-of-access to some of Terminators more powerful features if you do.
Many functions are triggered with keyboard shortcuts. But mousers aren’t completely abandoned. Lets look again at the basic interface, but with the two primary menus showing:
You will never see a window that looks like this, as it is impossible to have both menus up at the same time.
The Context Menu - This is the main menu reached with
right-clickover a terminal, and will let you access all the settings, profiles, shortcuts and configurations. It is however kept brief to avoid the mega-menus that sometimes grow unchecked.
The Grouping Menu - This is reached with a
clickon the trio of coloured boxes in the titlebar. Later, when we cover Grouping and broadcasting to multiple terminals we will cover this properly. For now it is enough to know where it is and how to trigger it.
By default titlebars are shown. If the titlebar has been hidden The Grouping Menu functions will be added as a sub-menu to The Context Menu.
Changing the current layout¶
I’ve already used the term layout a few times in this page already. I should define what exactly is meant by a layout.
A layout describes the collection of windows in the current process, the tabs, and how the windows and tabs are divided up into terminals. It also includes the positions, dimensions, as well as other aspects related to how Terminator looks.
Besides the items in the The Context Menu there are three main methods to adjust the layout.
Using the splitters¶
So, by now you’ve probably made a few splits and used the mouse to drag them about, and you now have something resembling the following, minus the highlights:
Terminator lets us rebalance the terminals, equally dividing the available space between the siblings.
The different highlighting shows the siblings. The key thing to understand is that the blue splitters are considered siblings, which are children of the green parent. The green is itself a child of the red parent. By double-clicking the splitter, the space will be divided evenly between the siblings. So, double-clicking any of the blue splitters will give:
If instead we
double-click on the green splitter, we get:
But there’s more! We can use two modifier keys to rebalance more collections of
double-click the splitter and all children,
grandchildren, and so on, will be rebalanced.
all parents, grandparents, and so, on, will be re-balanced. You guessed it!
double-click and all visible terminals
will be rebalanced. It will not affect terminals in other windows or tabs.
double-click on green:
double-click on green:
double-click on green:
Dragging and dropping a terminal¶
There are two ways to drag a terminal from one location to another with in the
window. The simplest is to use the titlebar at the top of each terminal. Simply
click-drag, and you will be able to hover over the other terminals and drop
the dragged terminal to move it:
Here you can see a preview of the dragged terminal - scaled if large - and shading to show which area it will cover, which can be the top, bottom, left or right of an existing terminal.
The above action results in the following:
The other way to drag a terminal can be done from within the terminal with
right-click-drag. With this method once you start the
drag, you must release the
Ctrl key before releasing the
right-mouse-button. If you do not the drag will cancel.
You can drag between tabs by initiating a drag and hovering over the tab. Terminator will switch to the tab under the cursor, you can then drag to the desired position, and the terminal can be dropped.
You can also drag between Terminator windows provided the windows are part of the same process. By default all windows will be part of the same process. Windows will not be part of the same process if you deliberately turn off the DBus interface with the Preferences or the Command line options when starting Terminator up. Layouts are also currently isolated at a process level for technical reasons.
Using the keyboard¶
Of course, with Terminator being a terminal application, it makes sense to keep your hands on the keyboard as much as possible. So there are many shortcuts that you can tailor to your own preference. Here are the ones that will affect the layout:
|New instance ||
|Split terminal||Horizontally, Vertically||
|Hide window ||
|Resize terminal||Up, Down, Left, Right||
|Move Tab||Left, Right||
|||This is a separate process. As such, drag and drop will not work
to or from this new window, or subsequent windows launched using
|||Hide window will currently only work on the first window of the first terminator instance that you start. That is because at present it binds the shortcut globally (it has to, or it cannot unhide) and this can only be done once. This may change in future.|
Resetting the terminal¶
There are two shortcuts available for fixing the terminal if it starts to misbehave.
|Reset + Clear||
The scrollbar and scrollback buffer¶
As already mentioned, there is a Context Menu item to toggle the scrollbar. There is also a shortcut listed here.
In addition there are shortcuts for moving up and down in the scrollback buffer with more flexibility:
|Page [VS]||Up, Down||
|X Lines [VS] [XL]||Up, Down||
|Page [TS]||Up, Down|
|Half page [TS]||Up, Down|
|Line [TS] [MS]||Up, Down|
|[VS]||(1, 2) VTE Shortcuts: Default actions from VTE that are not configurable.|
|[XL]||X Lines: Where X may vary depending on distribution. On mine it is 4.|
|[TS]||(1, 2, 3) Terminator Shortcuts: Additional movement options from Terminator that are configurable.|
|[MS]||Masked Shortcuts: VTE provides default shortcuts for line up/down,
Search the buffer¶
It is possible to search the buffer, although at this time there is a limitation that the found string is not highlighted.
Resulting in a search bar at the bottom of the focused terminal:
This has buttons for moving back and forward through the results, as well as an option to wrap the search around.
Zooming the terminal¶
As mentioned above it is possible to zoom into and out of a terminal. There are also some modifiers to zoom more than just the current terminal.
|Target in ||
|+Receivers reset||N/A (TBD, plus in/out)|
|All reset||N/A (TBD, plus in/out)|
|||Target terminal is the current terminal when using the
keyboard shortcuts, or the terminal under the mouse when using
If you’re anything like me, you’ve spent time clicking among the half a dozen different terminals in the taskbar, trying to find the right one. Or maybe for you it is with tabs.
In Terminator you can rename three things:
Additionally all three can be saved/loaded from a layout, or the window title can be set using a command line option.
Insert terminal number¶
These shortcuts let you enumerate your terminals. It is handy if you need to login to a number of sequentially numbered machines. With multiple terminals the ordering may seem strange, but this is due to the nature of the splitting and the order in which the splits were performed.
|Insert terminal number||
|Insert zero padded terminal number||
These actions can also be done from The Grouping Menu.
It is possible to cycle back and forth through the available profiles that are defined in the Profiles tab of the Preferences Window, changing the behaviour and appearance of the current terminal.
In both cases there is currently no default shortcut set. I’m not convinced they would be used often enough to warrant assigning them. For those that find it useful, the feature is there to be configured.